Thank you for ordering your Toy Wrangler Shelf, now let's get it on your wall!
We highly recommend you use the hardware included in the package to secure your shelf to the wall, but an alternative would be command strips. If using Command Strips it is important to follow the directions on the package to avoid the shelf from falling.
Once up, please share a photo or video and tag us at Toy Wrangler!
Tools needed:
- Included Hardware
- Level
- Drill with 3/16 Drill bit
- Screwdriver or Screwdriver Drill bit
- Pen or Pencil
- Items Being Displayed
Please watch the video below on how to properly hang up your shelf and size them to fit your items!
Instructions:
Bottom Shelf Piece
1. Take shelf with 45 degree angle and level. Place the level on the lip of the shelf and place the shelf (this is the bottom piece) at the desired height.
2. Check the level to make sure it is straight and use the Pen or Pencil to mark the placement by placing a dot where the holes are.
3. Set down shelf and pick up the drill with the 3/16 drill bit attached. Drill where you placed the dots.
4. Once holes are drilled, insert the red anchors into the holes.
5. Grab shelf and screws. Align the shelf with the anchors and with your hands, screw in the screws to secure the shelf into place, starting with the outside holes and ten the middle.
6. Grab your screwdriver or screwdriver drill bit and tighten the screws. Be sure not to over tighten.
Top Shelf Piece
1. Grab Item you wish to display on the shelf. Place item into the top shelf piece and align it so that the bottom is sitting on the shelf attached to the wall. The item should have enough room to slide in and out of the shelves.
2. Use the level on the sides/ends to check that the top and bottom portion of the shelf is aligned.
3. Use the Pen or Pencil to mark the placement by placing a dot where the holes are.
4. Set down shelf and pick up the drill with the 3/16 drill bit attached. Drill where you placed the dots.
5. Once holes are drilled, insert the red anchors into the holes.
6. Grab shelf and screws. Align the shelf with the anchors and with your hands, screw in the screws to secure the shelf into place, starting with the outside holes and ten the middle.
7. Grab your screwdriver or screwdriver drill bit and tighten the screws. Be sure not to over tighten.
8. Slide your items into the shelves and Enjoy!